Industrial unit coolers for ammonia operation LSA-CSA

Industrial unit coolers for ammonia operation LSA-CSA

Fin spacing: 4.5 mm – 6 mm – 7.5 mm – 10 mm – 12 mm
From 1 to 6 fans, Ø 450 – 500 – 630 - 800 mm
Low noise operation and reduced energy consumption
392 models from 9 to 240 kW

Note: the construction features and dimensions of LHSA unit coolers are the same as the LHS unit coolers, for which a catalogne is available.

Main features Industrial unit coolers for ammonia operation LSA-CSA

Heat Exchanger

CHS – Compact Hitec Surface
TURBOFIN® 3 heat exchanger with stainless steel tubes and staggered rows, suitable for both positive and negative temperature applications for the conservation of products with low humidity content, or packed products.

LHS – Large Hitec Surface
TURBOFIN® 4 heat exchanger with stainless steel tubes and in-line rows, featuring a high ratio between the secondary fin surface and the primary tube surface, suitable for conservation cold rooms for products with high humidity content, and for freezing.

Fin spacing and best use

Range 4 – 4.5 mm: conservation at positive temperature
Range 6 – 6.0 mm: conservation at positive temperature
Range 7 – 7.5 mm: conservation at negative temperature
Range 10 - 10 mm: freezing and conservation at negative temperature
Range 12 - 12 mm: freezing

Defrost

N = air defrost (TC> 2°C)
E = electric defrost (TC> -35°C)
SB = water spray defrost (TC> -2°C)
G = hot gas defrost for coil and electric defrost in the drain tray (TC> -35°C)
GB = hot gas defrost for coil and drain tray (TC> -35°C)

CS80 Industrial evaporator for cold rooms range CHS-LHS



LS45W Industrial unit cooler



Industrial evaporator for cold rooms LS50 3200



LS71 LHS – Large Hitec Surface Industrial Unit Coolers

Fluidi
Materiali Costruttivi
Accessori

Applicazioni

Fin spacing: 4.5 mm – 6 mm – 7.5 mm – 10 mm – 12 mm
From 1 to 6 fans, Ø 450 – 500 – 630 - 800 mm
Low noise operation and reduced energy consumption
392 models from 9 to 240 kW

Note: the construction features and dimensions of LHSA unit coolers are the same as the LHS unit coolers, for which a catalogne is available.


SCROLL