CDH_CDW

LU-VE Exchangers is a trademark registered and owned by LU-VE Group. LU-VE Exchangers reserves the right to change specifications without prior notification. 31673578EN-01 *Ammonia and Brine refrigerants are not covered by Eurovent certification CD Dual discharge Industrial air coolers for cold rooms Fan motors CD units are fitted with 1 to 4 axial fans with high- efficiency AC or EC fan motors blowing trough the coil. Available in different fan diameters (ø 450, 500 and 630 mm). Integrated thermo contacts provide reliable protection against thermal overload. Options • Corrosion protection: Alupaint • Unit cooler switches • Unit cooler wiring • Fan switch (IS) • Insulated drain tray • Stainless steel casing and coil frame • Hinged fan shroud • Electric defrost (E) • Hot-gas defrost in coil + electric defrost in drain tray (G) • Hot-gas defrost both in coil and drain tray (GB) • Hot glycol defrost both in coil and drain tray (HG) • Draw-trough fan • Top fan • AVA connection - for brine application Certifications The LU-VE Exchangers quality system is in accordance with ISO 9001. All products are manufactured according to PED regulations. LU-VE Group participates in the ECP program for HE. Check ongoing validity of certificate*: www.eurovent-certification.com Mounting dimensions Detailed drawings showing all required mounting and refrigerant connection dimensions are available for download on Members area . Selection Selection and pricing is to be performed with our air heat exchanger selection software Refriger. Selection output includes all relevant technical data and dimensional drawings. Code description 1 Dual discharge Industrial air coolers (CD=with axial fans) 2 Fan diameter (45=450, 50=500-4P, 52=500-6P, 63=630-6P, 64=630-4P) 3 Technology (H=Hitec® for HFC and CO2, blank=for ammonia and brine) 4 Refrigerant system (blank=HFC, A=ammonia, W=brine, in case of CO2 see pos. 8) 5 Model type 6 Defrost system (N=air defrost, E=electric defrost, G=hot-gas defrost in coil + electric defrost in drain tray, GB=hot-gas defrost both in coil drain tray) 7 Fin spacing (4=4.5 mm, 6=6.0 mm, 7=7.5 mm, 10=10.0 mm) 8 Application (DX CO2=direct expansion for CO2, PB=pumped bottom feed for ammonia, PT=pumped top feed for ammonia) CD 63 H * 8608 E 6 * 1 2 3 4 5 6 7 8 Drawings