ГЛАВНАЯ > ПРОДУКЦИЯ > Промышленные воздухоохладители > CS, LS, ECS for cold rooms

Manuals
Drawings
Wirings
Software
CS, LS, ECS for cold rooms

CS, LS, ECS for cold rooms

Industrial evaporators for cold rooms CS, LS, ECS
Standard fin spacings 4.5, 6, 7.5, 10 and 12 mm
1 to 4 fans, ø 450, 500, 630, 710, 800 and 910 mm
Capacity range 6.7 up to 261.7 kW

Main characteristics CS, LS, ECS

CS - Compact Surface models feature internally grooved tubes and staggered rows, making them suitable for both positive and negative temperature application. CS range is particularly suitable for the preservation of low moisture products or packaged goods.

LS – Large Surface models, equipped with internally grooved tubes and in-line rows, have a high ratio of secondary fin surface to primary tube surface. They are ideal for high humidity cold rooms and freezing application.

ECS – These models are optimized for medium and low temperature CO2 application.

Fin spacing and best application

4=4.5 mm: preservation at positive temperature
6=6 mm: preservation at positive temperature
7=7.5 mm: preservation at negative temperature
10=10 mm: freezing and preservation at negative temperature
12=12 mm: freezing

Defrost systems

N=air defrost (TC > 2 °C)
E=electric defrost (TC > -35 °C)
G=hot-gas defrost in coil + electric defrost in drain tray (TC > -35 °C)
GB=hot-gas defrost both in coil and drain tray (TC > -35 °C)
SB=water defrost (TC > - 2 °C)

Casing

Corrosion-resistant galvanized steel casing with epoxy-polyester powder coating RAL 9003.

*not covered by Eurovent certification

CS80 + mounting feet



Options

For a full overview of all available options and additional technical specifications please refer to the product leaflet.

Fluidi

Applicazioni


SCROLL