HOME > PRODUCTS > Industrial unit coolers > Industrial evaporator for cold rooms CHS-LHS
Fin space: 4.5 mm – 6 mm – 7.5 mm – 10 mm – 12 mm
From 1 to 4 fans, Ø 450 – 500 – 630 - 710 - 800 mm
Low noise operation and reduced energy consumption
10 ranges from 7 to 216 kW
Large Hitec Surface available with in-line row pattern
CHS – Compact Hitec Surface
TURBOFIN® 3 heat exchanger
The heat exchanger with internally grooved tubes and staggered rows, suitable for both positive and negative temperature applications for the conservation of products with low humidity content, or packed products.
LHS – Large Hitec Surface
TURBOFIN® 4 heat exchanger
The heat exchanger with internally grooved tubes and in-line rows, featuring a high ratio between the secondary fin surface and the primary tube surface, suitable for conservation cold rooms for products with high humidity content, and for freezing.
Range 4 – 4.5 mm: conservation at positive temperature
Range 6 – 6,0 mm: conservation at positive temperature
Range 7 – 7.5 mm: conservation at negative temperature
Range 10 - 10 mm: freezing and conservation at negative temperature
Range 12 - 12 mm: freezing
N = air defrost (TC> 2°C)
E = electric defrost (TC> -35°C)
SB = water spray defrost (TC> -2°C)
G = hot gas defrost for coil and electric defrost in the drain tray (TC> -35°C)
GB = hot gas defrost for coil and drain tray (TC> -35°C)
Zinc coated steel casing with corrosion resistant powder coating finish
*not covered by Eurovent certification
Fin space: 4.5 mm – 6 mm – 7.5 mm – 10 mm – 12 mm
From 1 to 4 fans, Ø 450 – 500 – 630 - 710 - 800 mm
Low noise operation and reduced energy consumption
10 ranges from 7 to 216 kW
Large Hitec Surface available with in-line row pattern
LU-VE S.p.A. - Via Caduti della Liberazione, 53 21040 UBOLDO (Va) - Tel: +39 02 96716.1, e-mail: sales@luvegroup.com
REA Varese N°191975 - Capitale sociale € 62.704.488,80 (i.v.) - P. IVA 01570130128
