Industrial glycol air coolers CHSW-LHSW

Industrial glycol air coolers CHSW-LHSW

Fin spacing: 4.5 mm – 6 mm – 7.5 mm – 10 mm – 12 mm
From 1 to 6 fans, Ø 450 – 500 – 630 - 800 mm
Low noise operation and reduced energy consumption
784 models from 5 to 162 kW

Main features Industrial glycol air coolers CHSW-LHSW

Heat exchanger

The TURBOCOOLER® high-efficiency heat exchangers which characterise this range of air coolers have new inner-grooved copper tubes specially designed for water-glycol and new Turbofin 3 and Turbofin 4 aluminium fins.

Fin spacing and best use

Range 4 – 4.5 mm: conservation at positive temperature
Range 6 – 6,0 mm: conservation at positive temperature
Range 7 – 7.5 mm: conservation at negative temperature
Range 10 - 10 mm: freezing and conservation at negative temperature
Range 12 - 12 mm: freezing

DEFROST

N = air defrost (TC> 2°C)
E = electric defrost (TC> -35°C)
SB = water spray defrost (TC> -2°C)
G = hot gas defrost for coil and electric defrost in the drain tray (TC> -35°C)
GB = hot gas defrost for coil and drain tray (TC> -35°C)

CASING

Galvanized steel casing with corrosion-resistent powder coating finish

Note

The air cooler catalogues refer to the corresponding unit cooler series. Some characteristics are different, such as the diameter of the connection. It is possible to visualise the details of every product and to calculate it in working conditions by using the REFRIGER software.

CS80 Industrial evaporator for cold rooms range CHS-LHS



LS45W Industrial unit cooler

Fluidi
Materiali Costruttivi
Accessori

Applicazioni

Fin spacing: 4.5 mm – 6 mm – 7.5 mm – 10 mm – 12 mm
From 1 to 6 fans, Ø 450 – 500 – 630 - 800 mm
Low noise operation and reduced energy consumption
784 models from 5 to 162 kW


SCROLL