HOME > PRODUCTS > Industrial unit coolers > Industrial unit coolers for ammonia operation LSA-CSA
Fin spacing: 4.5 mm – 6 mm – 7.5 mm – 10 mm – 12 mm
From 1 to 6 fans, Ø 450 – 500 – 630 - 800 mm
Low noise operation and reduced energy consumption
392 models from 9 to 240 kW
Note: the construction features and dimensions of LHSA unit coolers are the same as the LHS unit coolers, for which a catalogne is available.
CHS – Compact Hitec Surface
TURBOFIN® 3 heat exchanger with stainless steel tubes and staggered rows, suitable for both positive and negative temperature applications for the conservation of products with low humidity content, or packed products.
LHS – Large Hitec Surface
TURBOFIN® 4 heat exchanger with stainless steel tubes and in-line rows, featuring a high ratio between the secondary fin surface and the primary tube surface, suitable for conservation cold rooms for products with high humidity content, and for freezing.
Range 4 – 4.5 mm: conservation at positive temperature
Range 6 – 6.0 mm: conservation at positive temperature
Range 7 – 7.5 mm: conservation at negative temperature
Range 10 - 10 mm: freezing and conservation at negative temperature
Range 12 - 12 mm: freezing
N = air defrost (TC> 2°C)
E = electric defrost (TC> -35°C)
SB = water spray defrost (TC> -2°C)
G = hot gas defrost for coil and electric defrost in the drain tray (TC> -35°C)
GB = hot gas defrost for coil and drain tray (TC> -35°C)
Fin spacing: 4.5 mm – 6 mm – 7.5 mm – 10 mm – 12 mm
From 1 to 6 fans, Ø 450 – 500 – 630 - 800 mm
Low noise operation and reduced energy consumption
392 models from 9 to 240 kW
Note: the construction features and dimensions of LHSA unit coolers are the same as the LHS unit coolers, for which a catalogne is available.
LU-VE S.p.A. - Via Caduti della Liberazione, 53 21040 UBOLDO (Va) - Tel: +39 02 96716.1, e-mail: sales@luvegroup.com
REA Varese N°191975 - Capitale sociale € 62.704.488,80 (i.v.) - P. IVA 01570130128